HP T1000, Supplementary Manual

Page: 57 / 274

27
Figure 4-2 System Settings Change Dialog Box
Terminal Settings Change Dialog Box
When you change terminal properties using the Setup Wizard or the Terminal
Properties dialog box, you will click on either the Finish or OK command button to
save your new settings and close the application. The Terminal Settings Change
dialog box will then display. Figure 4-3 shows the Terminal Settings Change
dialog box.
Figure 4-3 Terminal Settings Change Dialog Box
This dialog box contains the Restart command button. The terminal must be
restarted in order for your new settings to take effect. Click on Restart to restart the
terminal. The T1000 Connection Manager
displays. See “Connections
Management” in the users guide for detailed information about configuring and
making terminal connections.