manualshive.com logo in svg

HP Surestore 660ex - Optical Jukebox, User Manual, Page: 58 / 130

Share
Download
HP Surestore 660ex - Optical Jukebox User Manual Download Page 58

3-18

Chapter 3

 

Operating the Jukebox

Setting the SCSI IDs

NOTE

In the next step you will choose a new ID. Review this note.

This jukebox, by default, assigns ID 6 to the jukebox controller. When in LUN 
mode, the jukebox controller ID uses LUN 0 for itself and assigns the drives on 
Bus 1 to LUNs 1 to 4 or LUNs 1 to 6 (depending on whether you have four or 
six drives on Bus 1 in your model of the jukebox).The result is that there are two 
types of devices (controller and drives) at ID 6.

Some host computer systems do not allow you to assign different device types to 
the same ID. If your host computer system does not support multiple types at the 
same ID and you want to use LUN mode, you must select different IDs for the 
jukebox controller (

JKBX ID #

) and the drives (

DRV #

). 

Tables in Appendix B show jukebox default settings and an example of setting 
the jukebox controller and drives to different IDs (one digit apart).

If another device ID is placed between the jukebox controller and the drives, 
problems can result. For this reason, the jukebox will not accept IDs for the jukebox 
controller and drives that are more than one digit apart. You will receive a 

CONFLICT

 message.

6. Press 

NEXT

 or 

PREV

 until the new ID that you want displays and then press 

ENTER

. 

If the jukebox is set to 

LUN MODE ON

, go to Step 8. Only one ID can be 

changed and the ID automatically updates when you press 

ENTER

. 

7. (If using basic SCSI addressing - LUN mode OFF) Press 

NEXT

 until 

UPDATE

 

displays, and then press 

ENTER

.

8.

UPDATE

 or 

WAIT FOR UPDATE 

and then 

ID’S SAVED

 displays briefly.

•

 If the new settings do not conflict with other SCSI IDs on the bus, 

SCSI 

ID’S

 displays. 

•

If the new settings conflict with other IDs on the SCSI bus, 

CONFLICT-ABORTED

 displays briefly and then 

VIEW ID’S

 displays. 

Any changes entered are lost, and you must repeat steps 3 through 6 to set a 
new ID.

NOTE

When in LUN mode:
If the new ID you choose results in the IDs for the jukebox controller and the drives 
being more than one digit apart, the jukebox displays 

CONFLICT

 and rejects the ID.

9.  Press 

CANCEL

 until 

READY

 displays.

Summary of Contents for Surestore 660ex - Optical Jukebox



































































































































Reviews:

No comments