HP StorageWorks DLT VS 40, Reference Manual

Page: 46 / 68

Operating the DLT VS 40/80 Tape Drive
46 DLT VS 40/80 GB Tape Drive Reference Guide
■
Store cartridges in a dust-free environment where the relative humidity is
between 20% and 80% (noncondensing). For longer cartridge life, store the
cartridge at 20% to 80% relative humidity.
■ Store cartridges in their storage cases.
■
Do not drop or strike a cartridge. Excessive shock can displace the tape leader,
making the cartridge unusable and possibly damaging your DLT VS 40/80
GB tape drive.
■ Place identification labels only in the slide-in slot on the front of the cartridge.
■ Never use any type of adhesive labels on the cartridges.
■ Never stack cartridges more than five high.
Condensation
Condensation can be a problem for tape drives and cartridges. To minimize the
chance of condensation, stay within the specifications above for using and storing
cartridges and observe the following guidelines:
■ Position the drive where the temperature is relatively stable - away from open
windows, heat sources, and doors.
■
Avoid leaving cartridges in severe temperature conditions, for example, in a
car standing in bright sunlight.
■ Avoid transferring data (reading from and writing to cartridges) when the
temperature is changing by more than 10ºC (18ºF) per hour.
■
If you bring a cold tape drive or cartridge into a warm room, allow time for it
to warm to room temperature before using it. For example, if you have moved
the drive from a cold car to a warm room, allow time for the drive to reach
room temperature (up to 24 hours if the temperature change is extreme.)