manualshive.com logo in svg

HP StorageWorks 2000i, Reference Manual, Page: 111 / 118

Share
Download
HP StorageWorks 2000i Reference Manual Download Page 111

HP StorageWorks 2000 G2 Modular Smart Array Reference Guide 111

6.

Quit the FTP session.

7.

If the updated disks must be power cycled:

a.

Shut down both controllers by using SMU.

b.

Power cycle all enclosures as described in your product’s user guide.

NOTE:

If you loaded firmware to a Seagate 750-Gbyte Barracuda ES SATA drive, after spin-up it 

will be busy for about 50 seconds completing its upgrade. Then it will be ready for host I/O.

8.

In SMU, verify that each disk has the correct firmware revision.

9.

Resume host I/O.

Installing a license file

1.

Ensure that the license file is saved to a network location that the storage system can access.

2.

Open a Command Prompt (Windows) or a terminal window (UNIX) and navigate to the directory 

containing the firmware file to load.

3.

Log in to the controller enclosure that the file was generated for:

ftp

 

controller-network-address

For example:

ftp 10.1.0.9

4.

Log in as an FTP user.

5.

Enter:

put

 

license-file

 

license

For example:

put certificate.txt license

A message confirms whether installation succeeded or failed. If installation succeeds, licensing 

changes take effect immediately.

Summary of Contents for StorageWorks 2000i























































































































Reviews:

No comments