39
ENGLI
SH
Resetting the Frame
You can reset your HP Smart Wi-Fi Display to factory default settings, as follows:
1.
From the
Main Menu
, navigate to
Setup
and press the
Select
button.
2.
Navigate to
Factory Defaults
and press the
Select
button.
3.
You will be asked to confirm that you want to reset your HP Smart Wi-Fi Display.
Select
Yes
.
4.
The frame will reboot once it is reset.
WARNING:
Setting your HP Smart Wi-Fi Display to factory default settings will
remove its details from the website, and you will need to add the frame again with
the new authorization code that you will see after going through the setup wizard.
For more information on the setup wizard, see “Setup Wizard” on page 13. For
information on adding a new frame, see “Adding Another Frame to your
www.hpframe.com Account” on page 27.
Cleaning and Care Tips
Please power off the HP Smart Wi-Fi Display before cleaning.
DO NOT push on the screen too firmly.
DO NOT spray or pour liquid cleaning agents directly on the screen or frame.
DO NOT use ammonia, alcohol, or abrasive detergent cleaning agents.
Cleaning the screen
1.
Wipe screen with a clean, soft, lint-free cloth to remove dust and loose particles.
2.
If further cleaning is required, apply an appropriate cleaning agent (approved
for LCD displays) to a clean, soft, lint-free cloth and wipe the screen.
Note:
Do not apply too much pressure on the screen to avoid damaging it.
Cleaning the frame and backing
1.
Use a clean, soft, lint-free cloth to remove dust and loose particles.
2.
If desired, apply an appropriate cleaning agent to a clean, soft, lint-free cloth
and wipe the appropriate surfaces.
Summary of Contents for sd828a1 - Smart WiFi Digital Photo Frame
Page 1: ...HP Smart Wi Fi Display User Manual Manuel de l utilisateur Revision 1 0 ...
Page 2: ......
Page 99: ......
Page 100: ...7525C00047A ...