HP sd828a1 - Smart WiFi Digital Photo Frame, User Manual

Page: 50 / 100

48
EN
GLISH
If you are already connected to a wireless network, then go into
Setup > Networking , and exit the network configuration process before
it is complete, you will be taken back to the Main Menu, but the
network may be disconnected. In order to correct this, try one of the
following:
•
Go back into the networking configuration screen and complete the network
setup, or
•
Using the Power switch on the back, switch the HP Smart Wi-Fi Display off and
then on again (it will re-connect upon starting up again).
When you press the Photo Rotate button on the remote control, the
image does not rotate immediately.
When you press the Photo Rotate button, the image will be rotated and then
displayed as the next slide transition a few seconds later.
The HP Smart Wi-Fi Display cannot connect through a network proxy
The HP Smart Wi-Fi Display does not support network proxy configurations. Because
of this issue, users in a business/corporate environment may not be able to properly
communicate with Internet content sources.
I’m having problems connecting my HP Smart Wi-Fi Display to my
wireless network.
Please verify that the firmware in your router is the latest version.