HP R3000v, User Manual

Page: 32 / 98

UPS MAINTENANCE
HP R3000v UPS User Guide S 164201731 Rev 1
26
Transporting the UPS
NOTE:
The UPS internal batteries MUST be disconnected during transport.
If the UPS requires any type of transportation:
1.
Verify that the UPS is unplugged and turned off.
2.
Remove the UPS right front bezel. See Figure 18.
To remove the bezel, loosen the two captive screws on the right side of the bezel.
Grasp the top and bottom of the bezel and slide the bezel to the right.
NOTE:
A ribbon cable connects the control panel to the UPS. Do not pull on the cable or
disconnect it.
NOTE:
Leave
ribbon cable
connected.
Figure 18
Removing the UPS Right Front Bezel
3.
Disconnect the internal battery connector (see Figure 19).
Figure 19
Disconnecting the UPS Internal Batteries
4.
Replace the UPS front bezel.