Removal and replacement procedures 14
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To remove the component:
1.
Power down the workstation blade (on page
11
).
2.
Remove the workstation blade (on page
11
).
3.
Access the internal workstation components (on page
12
).
4.
Remove the hard drive assembly.
5.
Remove the hard drive from the carrier.
CAUTION:
To avoid damage to the hard drive, use the retaining screw to lower the hard drive
assembly into position.
To replace the component, reverse the removal procedure.
