media
T H E U L T I M A T E
s y s t e m
9
INSTALLING OPENELEC
Installing OpenELEC on your HTPC
SELECTING THE OS DRIVE
Select the Drive you would like to install to
by pressing up/down.
You can install OpenELEC to flash drives,
hard drives, or even SSD.
Note: You cannot install to the same flash
drive that is plugged in.
INSTALLING TO A USB DRIVE YOU SAY?
There is a hidden USB Port located inside the HP ProLiant
MicroServer, on the motherboard itself.
Not only is this connected directly to the motherboard, but it will
be out of sight as well.
I prefer installing to Hard Drive. I would suggest installing on the included 250GB Drive HP
has provided you with. Hard drives are just faster than USB drives.
Also remember that your whole OpenELEC/XBMC installation will be on this drive, and
although that only takes around 80-120MB, all your media’s high quality covers and fanart
will be stored in the XBMC database, which can take up a lot of space.
Installing to USB though, gives you the ability to format and re-install at will, while a 250GB
hard drive might need some backing up first (If you intend to use that 250GB of freespace
for some media) before formatting.
It’s all up to you really - this is your system at the end of the day.
So what should I do?
WARNING! GOTCHA AHEAD
Please note that even if your Hard drive was formatted to NTFS, OpenELEC will format the
drive to a Linux file system on installation, and the drive will not be readable if you plug it
into a Windows Computer. Files will be accesable through the Network though.
Also make sure you select the correct drive. I personally disconnect all other drives (that
contain Media) temporarily when installing OpenELEC.