HP ProLiant ML350 Generation 4p, User Manual, Page: 115 / 156

Troubleshooting 115
Diagnostic Steps
To effectively troubleshoot a problem, HP recommends that you start with the
first flowchart in this section, "Start Diagnosis Flowchart (on page
115 )," and
follow the appropriate diagnostic path. If the other flowcharts do not provide a
troubleshooting solution, follow the diagnostic steps in "General Diagnosis
Flowchart (on page
117 )." The General Diagnosis flowchart is a generic
troubleshooting process to be used when the problem is not server-specific or is
not easily categorized into the other flowcharts.
The available flowcharts include:
•
Start Diagnosis Flowchart (on page 115 )
•
General Diagnosis Flowchart (on page 117 )
•
Power-On Problems Flowchart (on page 119 )
•
POST Problems Flowchart (on page 122 )
•
OS Boot Problems Flowchart (on page 125 )
•
Server Fault Indications Flowchart (on page 128 )
The number contained in parentheses in the flowchart boxes corresponds to a
table with references to other detailed documents or troubleshooting instructions.
Start Diagnosis Flowchart
Use the following flowchart to start the diagnostic process.
Item Refer to
1 "General Diagnosis Flowchart (on page 117 )"
2 "Power-On Problems Flowchart (on page 119 )"
3 "POST Problems Flowchart (on page 122 )"
4 "OS Boot Problems Flowchart (on page 125 )"
5 "Server Fault Indications Flowchart (on page 128 )"