HP ProLiant ML350 Generation 4p, User Manual, Page: 128 / 156

128 HP ProLiant ML350 Generation 4p Server User Guide
Server Fault Indications Flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page
103 )
•
•
•
•
•
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer to
1 "Management Agents (on page 103 )"
2 • "Integrated Management Log (on page 106 )"
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (
http://www.hp.com/support ).
3 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(
http://www.hp.com/products/servers/platforms )
4 System Management Homepage at https://localhost:2381
(
https://localhost:2381 )
5 "Power-On Problems ("Power-On Problems Flowchart" on page
119 )" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(
http://www.hp.com/support ).