Hardware options installation 28
b.
Connect the power cable.
12.
Install the air baffle (on page
16
).
13.
Install the access panel (on page
15
).
14.
Install the tower bezel (on page
13
).
15.
Return the server to an upright position.
16.
Connect the power cord to the server.
17.
Connect the power cord to the power source.
18.
Power up the server (on page
13
).
Controller options
The embedded HP Dynamic Smart Array B120i Controller only supports SATA devices. To obtain the SATA
driver required for RAID configuration, first download SPP (
http://www.hp.com/go/spp/download
).
For SAS drive installation, install an HP H220/H221 host bus adapter. For more information about the
controller and its features, see the
HP Dynamic Smart Array RAID Controller User Guide
on the HP website
(
http://www.hp.com/support/DSA_RAID_UG_en
).
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
Installing an HP H220/H221 host bus adapter
IMPORTANT:
For additional installation and configuration information, see the documentation
that ships with the option.
To install the component:
1.
Power down the server (on page
13
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
