Operations 16
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
Power down the server (on page
13
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Unlock the tower bezel (on page
14
).
4.
Place the server on its side.
5.
Remove the access panel:
a.
Loosen the access panel thumbscrew.
b.
Slide the access panel back.
c.
Lift the access panel away from the chassis.
Install the air baffle
1.
Insert the tabs on the baffle into the slots on the rear chassis.
