1.
Power off the server (
“Power off the server” (page 22)
).
2.
Remove the server from the rack.
3.
Remove the access panel.
4.
Remove the processor memory drawer (
“Remove the upper or lower processor memory drawer
or processor memory drawer blank” (page 26)
).
5.
Disconnect all cables from all installed expansion boards.
6.
Remove all expansion boards (
“Non-hot-plug expansion board” (page 52)
).
7.
Remove the SPI board (
“Remove the SPI board” (page 56)
).
8.
Remove the I/O expansion board, if installed.
9.
Remove the system board.
To replace a system board:
1.
Install the spare system board.
2.
Replace all components removed from the failed system board.
3.
Install the access panel.
System board
69
