HP ProLiant DL60 Gen9 Maintenance And Service Manual Download Page 82 | Manualshive

Page: 82 / 113

background image

Diagnostic tools 82

•

Rich configuration history

•

Health and service alerts

•

Easy export and upload to Service and Support

The Active Health System monitors and records changes in the server hardware and system

configuration. The Active Health System assists in diagnosing problems and delivering rapid resolution if

server failures occur.
The Active Health System collects the following types of data:

•

Server model

•

Serial number

•

Processor model and speed

•

Storage capacity and speed

•

Memory capacity and speed

•

Firmware/BIOS

Active Health System does not collect information about Active Health System users' operations,

finances, customers, employees, partners, or data center, such as IP addresses, host names, user

names, and passwords. Active Health System does not parse or change operating system data from

third-party error event log activities, such as content created or passed through by the operating system.
The data that is collected is managed according to the Hewlett Packard Enterprise Data Privacy policy.

For more information see the Hewlett Packard Enterprise website (

http://www.hpe.com/info/privacy

The Active Health System, in conjunction with the system monitoring provided by Agentless Management

or SNMP Pass-thru, provides continuous monitoring of hardware and configuration changes, system

status, and service alerts for various server components.
The Agentless Management Service is available in the SPP, which can be downloaded from the Hewlett

Packard Enterprise website (

http://www.hpe.com/servers/spp/download

). The Active Health System

log can be downloaded manually from iLO 4 or HPE Intelligent Provisioning and sent to Hewlett Packard

Enterprise.
For more information, see the following documents:

•

iLO User Guide

on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/ilo/docs

•

Intelligent Provisioning User Guide

on the Hewlett Packard Enterprise website

http://www.hpe.com/info/intelligentprovisioning/docs

HPE ProLiant Pre-boot Health Summary

If the server will not start up, you can use iLO to display diagnostic information on an external monitor.

This feature is supported on servers that support external video and have a UID button or an SUV

connector. When power is available to the server but the server is not powered on, iLO runs on auxiliary

power and can take control of the server video adapter to display the HPE ProLiant Pre-boot Health

Summary.
For additional information, see the following documents:

•

iLO 4 User Guide

— See the Hewlett Packard Enterprise website

http://www.hpe.com/info/ilo/docs

•

ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting —

See "Troubleshooting

Resources (on page

)."

«
...
80
81
82
83
84
...
»

Summary of Contents for ProLiant DL60 Gen9


















































































































Reviews:

No comments

Related manuals for ProLiant DL60 Gen9

Brand: Xerox Pages: 220

Brand: Xerox Pages: 28

DocuPrint 100MX

Brand: Xerox Pages: 2

StorTrends 1312-P

Brand: American Megatrends Pages: 2

Brand: Sun Microsystems Pages: 148

BladeCenter PN41

Brand: IBM Pages: 88

Brand: Fujitsu Siemens Computers Pages: 68

Brand: Hitachi Pages: 58

Brand: Hitachi Pages: 192

Brand: MAXDATA Pages: 2

Brand: MAXDATA Pages: 6

DIRECTORY SERVER 2.0 - GATEWAY

Brand: Red Hat Pages: 66

Brand: TAG Pages: 80

Brand: Supero Pages: 91

Brand: Supero Pages: 108

Brand: Supero Pages: 118

Brand: SMC Networks Pages: 19

Brand: Gigabyte Pages: 165

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands