HP ProLiant DL60 Gen9, Maintenance And Service Manual, Page: 68 / 113

Removal and replacement procedures 68
5.
Remove the quick-release latch rack ear assembly.
To replace the component, reverse the removal procedure.
System board
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION: To avoid ESD damage, when removing electrostatic-sensitive components from
the failed system board, place the components on a static-dissipating work surface or inside
separate antistatic bags.
To remove the system board assembly:
1.
Power down the server (on page 27 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 30 ).
4.
Remove the access panel (" Access panel " on page 37 ).
5.
Remove the air baffle (on page 31 ).
6.
Remove the fans (" Fan and fan blank " on page 47 ).
7.
Remove the fan blanks (" Fan blank " on page 47 ).
8.
Remove the PCI riser cages (" Remove the PCI riser cage " on page 32 ).
9.
Disconnect all cables connected to the system board.
10.
Remove the Smart Storage Battery (" Smart Storage Battery " on page 40 ).
11.
Remove all DIMMs (" Removing a DIMM " on page 49 ).