Operations 34
7.
Secure the full-length expansion board retainer.
8.
Install the access panel (on page
25
).
9.
Install the server into the rack ("
Installing the server into the rack
" on page
40
).
10.
Connect each power cord to the server.
11.
Connect each power cord to the power source.
12.
Power up the server (on page
23
).
Remove the air baffle
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To remove the component:
1.
Power down the server (on page
23
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend or remove the server from the rack ("
Remove the server from the rack
" on page
24
, "
Extend the
server from the rack
" on page
23
).
4.
Remove the access panel (on page
25
).
CAUTION:
Do not detach the cable that connects the battery pack to the cache module.
Detaching the cable causes any unsaved data in the cache module to be lost.
IMPORTANT:
It is necessary to remove the PCIe riser cage only if there is a full-length expansion
board installed.
5.
If a full-length expansion board is installed in the primary PCIe riser cage, release the expansion board
retainer and remove the primary PCIe riser cage (on page
29
).
Summary of Contents for ProLiant DL385p
