NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE:
FIO indicates that this option is only available as a factory installable option.
NOTE:
If you already have an s6500 chassis skip to Step 1A.
NOTE:
s6500 Chassis cannot have a mix of SL270s with SL250s and/or SL230s due to different Carbondale (CD) FW versions. You will
be unable to order such a configuration. SL250s and SL230s can be intermixed in an s6500 chassis because they possess the same
Carbondale (CD) FW versions, but one that differs from SL270s. This rule does not apply to any combination of servers with Ivy Bridge
processors, the Carbondale version in those processors is the same.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis
HP ProLiant s6500 without Fans 4U Configure-to-order Chassis
NOTE:
You must choose Power Supplies and fans as the chassis does not include them.
NOTE:
If you already have a s6500 chassis you can buy server trays below.
614167-B21
Step 1A: Select Nodes
NOTE:
Mixing and matching of half width trays is supported in the s6500 chassis.
NOTE:
If you do not fill up chassis with servers, the HP node blank Kit (688928-B21 for left and 688930-B21 for right) needs to be
ordered for each half width 1U space unpopulated.
HP Server Nodes
HP ProLiant SL230s Gen8 1U Left Half Width Tray Configure-to-order Server
650047-B21
HP ProLiant SL230s Gen8 1U Right Half Width Tray Configure-to-order Server
650048-B21
Step 2: Choose Required Node Options (only one of the following from each list unless
otherwise noted)
HP Processors
NOTE:
If 2 processors are desired, select one xxxxx-L21 and one xxxxxx-B21.
Entry Processors - E5-2600 v2 series Processors
NOTE:
All support up to 1333MHz memory speeds.
HP SL2x0s Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) FIO Processor Kit
725942-L21
Base Processors - E5-2600 v2 series Processors
NOTE:
All support up to1600MHz DDR3 memory speeds.
HP SL2x0s Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO Processor Kit
725941-L21
HP SL2x0s Gen8 Intel® Xeon® E5-2650Lv2 (1.7GHz/10-core/25MB/70W) FIO Processor
Kit
725943-L21
Performance Processors - E5-2600 v2 series Processors
NOTE:
For 130W CPU support and configuration, please contact your HP account team.
NOTE:
For 115W CPU support, customers must use the HP 1500W Common Slot
Platinum Plus Hot Plug Power Supply Kit (684532-B21).
NOTE:
All support up to 1866MHz DDR3 memory speeds.
HP SL2x0s Gen8 Intel® Xeon® E5-2695v2 (2.4GHz/12-core/30MB/115W) FIO Processor
Kit
725944-L21
HP SL2x0s Gen8 Intel® Xeon® E5-2680v2 (2.8GHz/10-core/25MB/115W) FIO Processor
Kit
725937-L21
QuickSpecs
HP ProLiant SL230s Generation8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14231 North America — Version 25 — December 16, 2013
Page 18
