HP ProLiant DL380 Gen9, Maintenance And Service Manual

Page: 30 / 142

Removal and replacement procedures 30
2.
After the display fully ejects, rotate the display to view the LEDs.
Release the full-length expansion board retainer
To remove the component:
1.
Power down the server (on page 27 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 28 ).
4.
Remove the access panel (" Access panel " on page 32 ).
5.
Release the full-length expansion board retainer.
To replace the component, reverse the removal procedure.