HP ProLiant DL380 G7 Maintenance And Service Manual Download Page 55

Page: 55 / 111

Removal and replacement procedures 55

CAUTION:

In systems that use external data storage, be sure that the server is the first unit to be

powered down and the last to be powered back up. Taking this precaution ensures that the system

does not erroneously mark the drives as failed when the server is powered up.

Extend the server from the rack (on page

Remove the access panel ("

Access panel

" on page

Remove the PCI riser cage ("

PCI riser cage

" on page

If the capacitor pack is connected to the cache module, disconnect the capacitor pack cable from the
connector on the top of the cache module.

Disconnect the capacitor pack from the air baffle.

To replace the component, reverse the removal procedure.

Expansion slot covers

CAUTION:

To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser cage.

Summary of Contents for ProLiant DL380 G7
















































































































Search results

Summary of Contents for ProLiant DL380 G7

Reviews:

Related manuals for ProLiant DL380 G7

Brands by name

Popular brands

HP ProLiant DL380 G7, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL380 G7

Reviews:

Related manuals for ProLiant DL380 G7

Brands by name

Popular brands