HP ProLiant DL380 G7, Maintenance And Service Manual

Page: 46 / 111

Removal and replacement procedures 46
To replace the component, reverse the removal procedure.
Front left bezel
To remove the component:
1.
Power down the server (on page 26 ).
2.
Extend or remove the server from the rack (" Remove the server from the rack " on page 28 , " Extend the
server from the rack " on page 27 ).
3.
Remove the access panel (" Access panel " on page 31 ).
4.
Remove the PCI riser cage (" PCI riser cage " on page 33 ).
5.
Remove the air baffle (" Air baffle " on page 32 ).
6.
Extend or remove the Systems Insight Display (" Systems Insight Display " on page 45 ).
7.
Remove the three T-10 Torx screws, and then detach the front bezel.
To replace the component, reverse the removal procedure.
Front right bezel
To remove the component:
1.
Extend or remove the server from the rack (" Remove the server from the rack " on page 28 , " Extend the
server from the rack " on page 27 ).