Removal and replacement procedures 25
3.
Remove the two screws and detach the front bezel.
To replace the component, reverse the removal procedure.
Front fan bracket
To remove the component:
1.
Power down the server (on page
20
).
2.
Extend or remove the server from the rack ("
Extend the server from the rack
" on page
19
, "
Remove
the server from the rack
" on page
20
).
3.
Remove the access panel ("
Access panel
" on page
22
).
4.
Remove the front fan bracket.
5.
Remove all hot-plug fans from the front fan bracket ("
Hot-plug fan
" on page
49
).
To replace the front fan bracket, reverse the removal steps and press down on the top of each fan to be
sure it is seated properly.
