Setup and Installation in a Rack
4.
If you are configuring a Microsoft® or Linux operating system, connect the
Ethernet crossover cable between the servers. Use the same RJ-45 connector (1),
NIC 1, on each server.
5.
Connect peripheral devices, such as the keyboard, mouse, and monitor. For
information on peripheral device connections, refer to “Component and LED
Identification” in Chapter 3.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into
RJ-45 connectors.
IMPORTANT:
If the RILOE II board is installed in the server, be sure that you attach the video
cable to the video connector on the rear of the RILOE II board. The standard video connector
on the server rear panel is not used when the RILOE II board is installed. For more
information, refer to the
HP Remote Insight Lights-Out Edition II User Guide
on the
Documentation CD.
NOTE:
If you are using a KVM switchbox, refer to the switchbox documentation for detailed
instructions.
6.
Connect the power cords to the servers and storage system.
IMPORTANT:
Do
not
power on the servers or the storage system until instructed to
power on.
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
5-19
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: f-ch5 Setup and Installation in a Rack
Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 1:02 PM
