HP Array Configuration Utility 75
PreferredPathMode =
Auto
|Manual
; COMMENT: the following five entries are used to optimize the controller
performance for video
MNPDelay = 0|1|2|...|
60
; units are minutes, zero indicates disabled
IRPEnable = Yes|
No
DPOEnable = Yes|
No
ElevatorSortEnable =
Yes
|No
QueueDepth = 2|4|8|16|32|
Auto
Array
= A|B|C|D|E|F|G|...Z|a|b|c|d|e|f
OnlineSpare =
None
|
N
| Port:ID,Port:ID... | Box:Bay,Box:Bay... |
Port:Box:Bay,Port:Box:Bay,... ; COMMENT: These values are available only in
Custom method mode. In Auto method mode, the choices are
Yes
|No.
Drive = * |
N
| Port:ID,Port:ID... | Box:Bay,Box:Bay... |
Port:Box:Bay,Port:Box:Bay,...
DriveType = SCSI | SAS | SATA
LogicalDrive
= 1|2|3|...32
RAID = 0|1|5|50|6|60|adg|
auto
; COMMENT: RAID 6 and 60 are only available when
SAAP is installed and the license key registered
ParityGroups =
2
|
N
; COMMENT: Necessary only for RAID 50 or 60.
N
> 2
Size = [
N
]|
Max
Sectors =
32
|63
StripeSize = 8|16|32|64|128|256
ArrayAccelerator =
Enable
|Disable
PreferredPath =
1
|2
HBA_WW_ID = WWN
ConnectionName = UserDefinedName
HostMode = Default | Windows | Windows(degrade | openVMS | Tru64 | Linux |
Solaris | Netware | HP | Windows Sp2 ; COMMENT: The Windows(degrade value
must be entered as written.
Script file options
Options in ACU script files are divided into the following categories:
•
Control category (on page
77
)
•
Controller category (on page
77
)
•
Array category (on page
80
)
•
Logical Drive category (on page
83
)
