Step 3: Choose Additional Factory Integratable Options
HP Rack Kits
NOTE:
Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
NOTE:
Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not
allow for in rack serviceability. The HP 1U Gen8 Cable Management Arm is not available
when using Friction Rails. To assist in the installation of the server into the rack an
optional installation tool is available by contacting your local services representative
(p/n 695539-001).
Caution:
HP recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 1U FIO Friction Rail Kit
NOTE:
Kit contains non-telescoping friction rails which do not allow for in rack
serviceability. The HP 1U Gen8 Cable Management Arm is not available when using
Friction Rails. Caution: HP recommends that a minimum of two people is required for all
Rack Server installations. Please refer to your installation instructions for proper tools
and number of people to use for any installation.
663200-B21
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
C6N36A
Converged Infrastructure
Management Software
HP OneView with iLO Advanced - Server hardware required on same purchase order
HP OneView incl 3yr 24x7 Supp FIO Bundle Phys 1 Svr Lic
E5Y43A
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and "Additional Options" section below.
QuickSpecs
HP ProLiant DL360e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14327 Worldwide — Version 33 — December 16, 2013
Page 25
