b. On the NIC page, the system displays the NIC devices.
c. Ensure that the
Location
field and
MAC Address
field are reported.
d. The
IP Address
field and
Status
field will not report; that is normal.
e. If a Network port is not recognized under
Location
or
MAC address
that NIC device
might be bad.
f. If bad Port is located in server slot 1 or slot 2 replace appropriate PCIe NIC card. If bad
Port is in the Embedded location, you must replace the server as NIC device is
integrated onto server motherboard.
8. If none of the ports are failed, navigate to
HP Diagnostics Menu
>
Component Tests
>
Networks
and follow on-screen directions to perform network tests.
Next steps
If PCIe NIC is defective, continue with the following removal and replacement procedures.
Related links
NIC problems
on page 25
Replacing a NIC
About this task
Follow the steps below to replace the DL360/380G9 1Gb PCIE DUAL PT NIC.
Internal Field Replaceable Units
November 2015
Maintaining and Troubleshooting the HP ProLiant DL360 G9 Server
27
Comments on this document? [email protected]
