Hardware options installation 34
4.
Install the hard drive.
Installing a four-bay hard drive cage
To install the component:
1.
Power down the server (on page
20
).
2.
Remove the server from the rack (on page
20
).
3.
Remove the primary access panel (on page
21
).
4.
Remove the secondary access panel (on page
21
).
5.
Disconnect the front panel LED cable and the front USB cable.
6.
Disconnect the hard drive cables from the system board.
7.
Disconnect cables from any other devices installed in the hard drive cage, if necessary.
8.
Remove all hard drives ("
Removing a hard drive
" on page
32
).
Summary of Contents for ProLiant DL320 Generation 5p
