Removal and replacement procedures 56
8.
Install the heatsink.
IMPORTANT:
To ensure proper cooling, be sure the processor air baffle is installed at all times
(if applicable).
9.
Install all components removed from the failed system board.
IMPORTANT:
Install all components with the same configuration that was used on the failed
system board.
10.
Install the secondary access panel ("
Remove the secondary access panel
" on page
28
).
11.
Install the primary access panel ("
Primary access panel
" on page
29
).
12.
Power up the server.
After you replace the system board, you must re-enter the server serial number and the product ID.
1.
During the server startup sequence, press the
F9
key to access RBSU.
2.
Select the
Advanced Options
menu.
3.
Select
Serial Number
. The following warning is displayed:
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on
the chassis.
4.
Press the
Enter
key to clear the warning.
5.
Enter the serial number.
6.
Select
Product ID
. The following warning is displayed.
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7.
Enter the product ID and press the
Enter
key.
8.
Press the
Esc
key to close the menu.
9.
Press the
Esc
key to exit RBSU.
10.
Press the
F10
key to confirm exiting RBSU. The server will automatically reboot.
Summary of Contents for ProLiant DL320 Generation 5p
