Removal and replacement procedures 39
7.
Remove the front I/O assembly.
To replace the component, reverse the removal procedure.
Hard drive cage
To remove the component:
1.
Power down the server (on page
27
).
2.
Remove the server from the rack (on page
28
).
3.
Remove the primary access panel ("
Primary access panel
" on page
29
).
4.
Remove the secondary access panel (on page
28
).
5.
Disconnect the front panel/LED cable from the system board. ("
Cabling overview
" on page
75
)
6.
Disconnect the hard drive cables from the system board.
7.
Disconnect cables from any other devices installed in the hard drive cage, if installed.
8.
Remove all hard drives ("
Hard drive
" on page
30
).
9.
Remove all hard drive blanks ("
Hard drive blank
" on page
29
).
10.
Remove the optical drive, if installed ("
Optical drive
" on page
34
).
11.
Remove the front I/O assembly ("
Front I/O assembly
" on page
38
).
12.
Remove the hard drive cage.
Summary of Contents for ProLiant DL320 Generation 5p
