manualshive.com logo in svg

HP ProLiant DL170h G6, Maintenance And Service Manual, Page: 60 / 89

Share
Download
HP ProLiant DL170h G6 Maintenance And Service Manual Download Page 60

 

 

Connectors, Switches, and LEDs  60  

 

 

Connectors, Switches, and LEDs 

This chapter contains illustrations and tables identifying and describing the connectors, switches, 
buttons, and LED indicators located on the front panel, rear panel, system board and hard drives of 

the HP ProLiant DL170h Generation 6. 

Connectors and Components 

Front Panel Components  

Figure 48 

Front panel components

 

of a two-Node system, 8 LFF HDD cage with optional front power/LED kit 

 

Item Description 

1 

Power button of Node 2 

2 

Chassis UID LED Button 

3 

Power button of Node 4  

4 

Health LED of Node 2 

5 

Health LED of Node 4+ 

6 

Thumbscrews for rack mounting 

7 

Hard disk drive (HDD) activity LED

 

8 

Hard disk drive (HDD) location/error  LED 

9 

Hard disk drive (HDD) bay

 

All manuals and user guides at all-guides.com

Summary of Contents for ProLiant DL170h G6


























































































Reviews:

No comments