manualshive.com logo in svg

HP ProLiant DL170h G6, Maintenance And Service Manual, Page: 49 / 89

Share
Download
HP ProLiant DL170h G6 Maintenance And Service Manual Download Page 49

 

 

Removal and Replacement Procedures  49  

 

 

2.

 

Fasten the screws to secure the IPMI card to the chassis. 

Figure 28 

Installing the IPMI card to the bottom system board 

 

To install the IPMI card to the top system board  

1.

 

Align the IPMI card with the open expansion slot and press the IPMI card straight down into the 
expansion connector on the system board. 

2.

 

Fasten the system board to the tray and put the tray with system board into the chassis; secure 
the tray to the chassis.  

3.

 

Fasten the screws to secure the IPMI card to the chassis.  

Figure 29

 

Installing the IPMI card to the top system board

 

 

To remove the PCIe riser card:  

1.

 

Remove the two screws securing the riser card to the chassis. 

2.

 

Pull the riser card up and away from the main board. 

All manuals and user guides at all-guides.com

Summary of Contents for ProLiant DL170h G6


























































































Reviews:

No comments