HP ProLiant DL170h G6, Maintenance And Service Manual, Page: 54 / 89

Removal and Replacement Procedures 54
Figure 37 Removing the Node from the tray
Remove the bottom two Nodes
1.
Remove the six screws that secure the system board to the tray.
2.
Slide the system board back, up and out of the chassis.
Figure 38 Removing the bottom Nodes
To replace the system board:
To replace the bottom system board
1.
Put the system board in the chassis. The six screw holes on the chassis should align with the
system board.
2.
Fasten the six screws on the system board to secure the system board to the chassis.
All manuals and user guides at all-guides.com