HP ProLiant DL160 G5P, Service Manual

Page: 52 / 95

Removal and replacement procedures 52
Figure 26 Installing the non-hot-plug hard drive assembly
To remove the non-hot-plug hard drive:
1.
Loosen the screw with the T-15 wrench provided.
2.
Pull the hard drive assembly out of the drive bay.
Figure 27
Removing the non-hot-plug hard drive assembly
To remove a non-hot-plug hard drive disk from the carrier:
1.
Loosen the four screws on the carrier (two on each side).
2.
Lift the hard drive from the carrier.