HP ProLiant BL685c G6, Maintenance And Service Manual

Page: 63 / 70

Component identification 63
•
Processor 4 DIMM slots
System maintenance switch
Position Function Default
1* iLO 2 security override Off
2 Configuration lock Off
3 Reserved Off
4 Reserved Off
5* Password disabled Off
6* Reset configuration Off
7 Reserved Off
8 Reserved Off
*To access redundant ROM, set S1, S5, and S6 to ON.
System maintenance switch procedures
When you perform troubleshooting steps, this guide may instruct you to perform the following procedures:
•
Clear the system configuration (" Clearing the system configuration " on page 63 ).
•
Access the redundant ROM (" Accessing the redundant ROM " on page 64 ).
To complete these procedures, you must change physical settings on the system maintenance switch.
Clearing the system configuration
RBSU can be used to restore the factory default configuration. For more information, see "HP ROM-Based
Setup Utility." If the system is unable to boot into RBSU, use the following steps to clear the system
configuration:
1.
Power down the server blade (on page 24 ).
2.
Remove the server blade (on page 24 ).