QPI Link Retry restarts as cycle when a failure is detected on the link.
QPI Clock Failover redirects the forwarded clock to one of the two failover clock lanes in the event of
a forwarded clock failure.
QPI Self-Healing enables a QPI link to map a failed lane and downshift from full to ½ width (or ½
width to ¼ width) QPI link if there are errors on the link.
QPI Cycle Redundancy Checking (CRC) automatically detects data errors using a checksum of either
8 bits or 16 bits.
QPI Poisoning tags an erroneous packet with a "poisoned bit" on the QPI fabric.
QPI Lane Failover identifies a faulty lane within data paths removing them from operation reducing
command/address errors.
Server Blade Enclosure Infrastructure
Up to 10 hot-plug redundant Active Cool fans per enclosure.
Up to 6 hot-plug high efficiency redundant power supplies per enclosure.
Dual grid power providing redundant rack enclosure power feeds to the enclosure.
Up to eight interconnect modules per enclosure providing four simultaneous redundant fabrics for
FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.
Optional enclosure redundant Onboard Administrator system management module.
Industry Standard
Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0
Secure Digital 2.0
TMP 1.2
PXE 2.1
IEEE (see the NC553i Technical Specifications section)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
Active Directory v1.0 (Windows 2003)
IPMI 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
Carrier Grade Supplement
Standard Features
DA - 14179 Worldwide — Version 2 — December 28, 2012
Page 10
