Removal and replacement procedures 28
CAUTION:
To prevent damage to the server blade, apply pressure over the mezzanine
connector when installing the mezzanine card. Do not apply pressure to the edges of the card.
To replace the component, reverse the removal procedure.
HP Smart Array P400i Controller battery pack
To remove the component:
1.
Power down the server blade (on page
24
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Remove the cable from the battery pack.
5.
Remove the battery pack.
CAUTION:
Do not leave the cable disconnected from the battery pack or the cache module
and re-install the server blade. The loose end of the battery cable that is still connected can
cause a short circuit, leading to permanent electrical damage.
To replace the component, reverse the removal procedure.
HP Smart Array P400i Controller cache module
To remove the component:
1.
Power down the server blade (on page
24
).
2.
Remove the server blade (on page
24
).
3.
Remove the access panel ("
Access panel
" on page
25
).
4.
Disconnect the cable fron the cache module.
Summary of Contents for Proliant BL480c
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 15: ...Customer self repair 15 ...
