HP ProLiant BL460c G7 Maintenance And Service Manual Download Page 59 | Manualshive

Page: 59 / 74

background image

Diagnostic tools 59

Select

Insight Remote Support

from the menu on the right.

USB support and functionality

USB support

HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by
the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB

devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available normally.

Specifically, HP provides legacy USB functionality for the following:

•

POST

•

RBSU

•

Diagnostics

•

DOS

•

Operating environments which do not provide native USB support

Internal USB functionality

An internal USB connector is available for use with security key devices and USB drive keys. This solution

provides for use of a permanent USB key installed in the internal connector, avoiding issues of clearance on

the front of the rack and physical access to secure data.

External USB functionality

HP provides external USB support to enable local connection of USB devices for server blade administration,

configuration, and diagnostic procedures. For more information, see "Using the HP c-Class Blade SUV Cable

(on page

60

)."

For additional security, external USB functionality can be disabled through RBSU. Disabling external USB

support in RBSU disables the USB connectors on the HP c-Class Blade SUV Cable.

«
...
57
58
59
60
61
...
»

Summary of Contents for ProLiant BL460c G7











































































Reviews:

No comments

Related manuals for ProLiant BL460c G7

Redbooks ServeRAID-MR10k

Brand: IBM Pages: 48

Brand: NAIM Pages: 18

UniServer R4300 G5

Brand: H3C Pages: 16

Brand: Raidon Pages: 20

Brand: EMC Pages: 34

Brand: Alfresco Pages: 49

Serial Servers Vlinx VESR9xx

Brand: Vlinx Pages: 65

Brand: Supero Pages: 104

Brand: NASdeluxe Pages: 6

Brand: AirLive Pages: 221

MicroServer iTHX-W

Brand: iServer Pages: 5

Brand: AMX Pages: 2

Brand: QUANTA Pages: 177

Brand: Digitus Pages: 173

Brand: Gateway Pages: 124

TotalStorage DS4300 Turbo

Brand: IBM Pages: 164

Brand: RaidSonic Pages: 28

TOTALSTORAGE NAS 200

Brand: IBM Pages: 178

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands