Removal and Replacement Procedures
Smart Array 5i Plus Controller Module
To remove the Smart Array 5i Plus Controller module:
1. Power down the server blade and remove it from the server blade enclosure. Refer to the
“Server Blad e Preparation” section in this chapter.
2. Remove the access panel. Refer to the “ Access Panel” section in this chapter.
3. Turn the standoffs one-quarter turn counterclockwise (1).
4. Grasp the front and back of the module, near the connectors, and lift the module (2).
Figure 2-18: Removing the Smart Array 5i Plus Controller module
Reverse steps 1 through 4 to replace the Smart Array 5i Plus Controller module.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
2-19
HP CONFIDENTIAL Codename: Reppin Part Number: 316078-005 Last Saved On: 2/23/04 10:31 AM
