manualshive.com logo in svg

HP ProCurve MSM750, Quick Start Manual, Page: 6 / 6

Share
Download
HP ProCurve MSM750 Quick Start Manual Download Page 6

MSM750 Controller Quickstart 

6  

HP ProCurve Networking 

C. 

Test the wireless public access network 

Test the APs using a Wi-Fi-equipped computer: 

1. 

To ensure that you are using a wireless connection, disconnect any network cable from 
the test computer. 

2. 

Configure your computer to connect to the wireless network created by an MSM AP. By 
default, this network is named 

HP ProCurve

. 

3. 

Log in to the public access interface as described in 

Test the public access interface 

on 

page 5 and confirm that you can browse the Internet. 

Caution:  

WIRELESS SECURITY: It is recommended that once the MSM750 is installed, 

you review the security information in the 

MSM7xx Controllers Management 

and Configuration Guide

 and adjust the security settings to further safeguard 

the wireless network from intruders. 

© Copyright 2009 Hewlett-Packard Development Company, L.P. The information 

5992-6023 

contained herein is subject to change without notice. 

Summary of Contents for ProCurve MSM750







Reviews:

No comments