MSM750 Controller Quickstart
3
HP ProCurve Networking
C.
Start the MSM750
Power on the MSM750 and wait until the power light stops blinking.
D.
Connect to the management tool and log in
Note:
A factory-default MSM750 is assumed.
1.
In a web browser, enter the address:
https://192.168.1.1
.
2.
At the security certificate prompt proceed as follows:
•
In Microsoft Internet Explorer 7, select
Continue to this website
.
•
In Firefox 2, select
Accept this certificate temporarily for this session
and
OK
.
To eliminate the security warning, you need to replace the default certificate that is
installed on the MSM750. For more information, see
About certificate warnings
in the
MSM7xx Controllers Management and Configuration Guide
.
3.
On the Login page, enter
admin
for
Username
and
Password
and then select
Login
.
4.
On the License Agreement page, read the agreement and select
Accept License
Agreement
.
5.
On the Registration page, register now if desired. You can register later by selecting
Service Controller >> Maintenance > Registration
.
6.
If a
Country
prompt appears, select the country in which the MSM750 will operate.
Caution:
The correct country must be selected.
7.
At the password prompt it is recommended that you change the password. Enter the
new password and select
Save
. Passwords must be at least six characters long and
include four different characters.
E.
Configure system time settings
Accurate time is critical for correct operation of the MSM750, as the time configured on the
MSM750 is used on all controlled APs. Configure system time settings as follows:
1.
In the management tool, select
Service Controller >> Management > System time
.
Using the management tool
Key elements of the management tool user interface are defined as follows:
In this quickstart and referenced documentation,
instructions to select specific management tool
elements and menus are specified in the form:
“Select
Service Controller >> Security > Firewall
.”
This instructs you to select the
Service Controller
element in the Network Tree, and then in the right
pane, select the
Security
main menu, and finally,
select its
Firewall
sub-menu. All elements to the left
of the double angle brackets
>>
are found in the
Network Tree.