2
MSM317 Access Device Installation Guide
• This product does not have a power switch. It is powered-on when the Uplink port is plugged
into a PoE power source.
• This product and all interconnected equipment must be installed indoors within the same
building, including all associated network connections as described by
Environment A
of the
IEEE 802.3af standard
.
• It is normal for the rear metal cover of the MSM317 to get hot during operation. The cover is a
heat sink and is used to dissipate the heat generated by the MSM317.
MSM317 connectors and status lights
MSM317 components
Faceplate
Trim Panel
MSM317 Body
NEMA-WD6 Version
BS 4662 Version
