2-5
Installing the Series 8200zl Switch
Installation Procedures
Installing the Series 8200zl
Sw
it
ch
W A R N I N G s
Installation Precautions
To prevent personal injury, follow these precautions when installing the
Series 8200zl Switch:
■
Due to product weight, two or more persons are required to handle
and mount the 8212zl.
To reduce the weight remove all modules
and power supplies.
■
Devices installed in a rack or cabinet should be mounted as low
as possible, with the heaviest device at the bottom and progres-
sively lighter devices installed above.
The rack or cabinet should be adequately secured to prevent it
from becoming unstable and/or falling over.
■
Ensure a cover plate is installed on any empty switch power
supply or module slot. A cover plate is required for safe
operation, and to ensure proper switch cooling. Never have
more than one power supply or module slot uncovered at a
time while the switch is powered on.
■
To avoid energy and mechanical hazards, never allow any part
of your body, jewelry, tool, or other foreign object to enter any
module or power supply slots.
■
This unit may have more than one power supply cable. To fully
power down the switch, you must disconnect all power supply
cables from the unit.
