1-5
Introducing the ProCurve Series 8200zl Switch
Front of the Switch
Int
rod
uci
ng th
e ProCurve
Series 8200zl Switch
Figure 1-4. Management Module LEDs
Table 1-2.
Management Module LEDs
These LEDs are located on the Management Module.
LED
State
Meaning
Auxiliary (green/
orange) For more
information see the
Management and
Configuration Guide
for your switch.
Blinking
green
1
Indicates the switch is processing a USB command file.
On green
The switch has finished processing the USB command file successfully.
Blinking
orange
2
Indicates an error condition.
Off
Indicates that no USB device has been inserted, or that the inserted USB device
cannot be recognized, or that no command file can be found on the inserted USB
device.
DIM
(green/orange)
On green
DIM (Dual in-line Memory Module) status is known and fault free.
Off
DIM status is unknown.
Blinking
orange
1
If DIM, Fault, and Self Test LEDs are blinking, DIMM failed self-test.
If DIM and Fault LEDs are blinking, an operational fault has occurred.
If fast blinking (400ms On and 400ms Off), an operational alert occurred and is
unresolved.
CF
(green/orange)
On green
CF (CompactFlash) status is known and fault free
Off
CF status is unknown.
Blinking
orange
1
If CF, Fault, and Self Test LEDs are blinking, CompactFlash failed self-test.
If CF and Fault LEDs are blinking, an operational fault has occurred.
If fast blinking (400ms On and 400ms Off), an operational alert occurred and is
unresolved (for example, CompactFlash not present).
