Configuring and Monitoring Port Security
Port Security Command Options and Operation
Using the CLI To Display Port Security Settings.
Syntax
:
show port-security
show port-security [e]
<port number>
show port-security [e] [<
port number
>-<
port number
]. . .[,<
port number
>]
Without port parameters,
show port-security
displays operating control settings
for all ports on a switch. For example:
Figure 9-2. Example Port Security Listing (Ports A7 and A8 Show the Default
Setting)
With port numbers included in the command,
show port-security
displays Learn
Mode, Address Limit, (alarm) Action, and Authorized Addresses for the spec
ified ports on a switch. The following example lists the full port security
configuration for a single port:
Figure 9-3. Example of the Port Security Configuration Display for a Single Port
9-11
