HP ProCurve 2800 Series Manual Download Page 124

Page: 124 / 300

RADIUS Authentication and Accounting

Configuring RADIUS Accounting

3. (Optional) Configure Session Blocking and Interim

Updating Options

These optional parameters give you additional control over accounting data.

■

Updates:

In addition to using a Start-Stop or Stop-Only trigger, you

can optionally configure the switch to send periodic accounting
record updates to a RADIUS server.

■

Suppress:

The switch can suppress accounting for an unknown user

having no username.

Syntax

[no] aaa accounting update periodic < 1 - 525600 >

Sets the accounting update period for all accounting ses
sions on the switch. (The

form disables the update

function and resets the value to zero.) (Default: zero; dis
abled)

Syntax

[no] aaa accounting suppress null-username

Disables accounting for unknown users having no user-
name. (Default: suppression disabled)

To continue the example in figure 5-8, suppose that you wanted the switch to:

■

Send updates every 10 minutes on in-progress accounting sessions.

■

Block accounting for unknown users (no username).

• Update Period

• Suppress Unknown User

Figure 5-9. Example of Optional Accounting Update Period and Accounting Suppression on Unknown User

5-24

Summary of Contents for ProCurve 2800 Series













































































































































































































































































































Search results

Summary of Contents for ProCurve 2800 Series

Reviews:

Related manuals for ProCurve 2800 Series

Brands by name

Popular brands

HP ProCurve 2800 Series, Manual

Search results

Summary of Contents for ProCurve 2800 Series

Reviews:

Related manuals for ProCurve 2800 Series

Brands by name

Popular brands