Configuring Port-Based Access Control (802.1X)
Configuring Switch Ports as 802.1X Authenticators
Configures an existing, static VLAN to be the Autho
rized-Client VLAN. Refer to “802.1X Open VLAN Mode”
on page 8-21.
aaa port-access authenticator <
port-list
>
(Syntax Continued)
[initialize]
On the specified ports, blocks inbound and outbound
traffic and restarts the 802.1X authentication process.
This happens only on ports configured with
control auto
and actively operating as 802.1X authenticators.
Note:
If a specified port is configured with
control
authorized
and
port-security
, and the port has learned an
authorized address, the port will remove this address
and learn a new one from the first packet it receives.
[reauthenticate]
Forces reauthentication (unless the authenticator is in
'HELD' state).
[clear-statistics]
Clears authenticator statistics counters.
8-18
