HP ProCurve 2510-24, Manual

Page: 65 / 318

3-21
Web and MAC Authentication
Configuring Web Authentication
Syntax: aaa port-access web-based [e] < port-list > [redirect-url < url >]
no aaa port-access web-based [e] < port-list > [redirect-url]
Specifies the URL that a user is redirected to after a
successful login. Any valid, fully-formed URL may be
used, for example, http://welcome-server/welcome.htm
or http://192.22.17.5. ProCurve recommends that you
provide a redirect URL when using Web Authentica-
tion.
Use the
no
form of the command to remove a specified
redirect URL.
(Default: There is no default URL. Browser behavior
for authenticated clients may not be acceptable.)
Syntax: aaa port-access web-based [e] < port-list > [server-timeout <1 - 300>]
Specifies the period, in seconds, the switch waits for a
server response to an authentication request. Depend-
ing on the current
max-requests
value, the switch sends
a new attempt or ends the authentication session.
(Default: 30 seconds)
Syntax: [no] aaa port-access web-based [e] < port-list > [ssl-login]
Enables or disables SSL login (https on port 443). SSL
must be enabled on the switch.
If SSL login is
enabled ,
a user is redirected to a secure
page, where they enter their username and password.
If SSL login is
disabled, a user is not redirected to a
secure page to enter their credentials.
Use the
no
form of the command to disable SSL login.
(Default: disabled)