HP ProCurve 1400-24G, Installation And Getting Started Manual

Page: 23 / 48

3-1
T
rou
bl
esh
oot
in
g
3
Troubleshooting
This section describes how to troubleshoot the switch.
This chapter describes the following:
■ basic troubleshooting tips ( page 3-1 )
■
diagnosing with the LEDs ( page 3-2 )
■ testing the switch by resetting It ( page 3-3 )
■
ProCurve Networking Customer Support Services ( page 3-3 )
Basic Troubleshooting Tips
Common problems and their solutions are listed in the following table.
For more information on possible network problems and their solutions, refer
to the technical note “Troubleshooting LAN Performance and Intermittent
Connectivity Problems”, which can be found on the ProCurve Networking
Web site,
http://www.procurve.com
, in the Information Library section.
Problem Resolution
Switch fails Power On Self
Test (POST) Troubleshoot using the LEDs. See “Diagnosing with the
LEDs” on page 3-2
Link light does not light when
a cable is connected. Look for loose or obviously faulty connections. If they
appear to be OK, make sure the connections are snug. If
that does not correct the problem, try a different cable.