IP Routing Features
Configuring RIP
The information in this display includes the following fields, which are defined
under ““RIP Interface Information” on page 3-35:
IP Address
,
Status
,
Send
mode
,
Recv mode
,
Metric
, and
Auth
.
The information also includes the following fields:
■
Bad packets received
– The number of packets that were received on
this interface and were not processed for any reason.
■
Bad routes received
– The number of route entries that were received
on this interface and were not processed for any reason.
■
Sent updates
– The number of RIP routing updates that have been sent
on this interface.
Displaying RIP interface information by IP Address:
For example, to
show the RIP interface information for the interface with IP address 100.2.0.1,
enter the
show ip rip interface
command as shown below:
Figure 3-10. Example of Show IP RIP Interface Output by IP Address
The information shown in this display has the same fields as for the display
for a specific VLAN ID. See the previous page for the definitions of these fields.
Syntax:
show ip rip interface [
ip-addr
| vlan <
vlan-id >
]
Displaying RIP Peer Information
To display RIP peer information, enter the
show ip rip peer
command at any
context level.
3-37
