Multimedia Traffic Control with IP Multicast (IGMP)
CLI: Configuring and Displaying IGMP
CLI: Configuring and Displaying IGMP
IGMP Commands Used in This Section
show ip igmp configuration
page 2-7
ip igmp
page 2-9
high-priority-forward
page 2-11
auto <[ethernet]
<port-list>
page 2-10
blocked <[ethernet]
<port-list>
page 2-10
forward <[ethernet]
<port-list
>
page 2-10
querier
page 2-11
show ip igmp
Refer to the section titled “Internet Group
Management Protocol (IGMP) Status” in appendix B
of the
Management and Configuration Guide
for your
switch.
Viewing the Current IGMP Configuration.
This command lists the IGMP
configuration for all VLANs configured on the switch or for a specific VLAN.
Syntax:
show ip igmp config
Displays IGMP configuration for all VLANs on the switch.
show ip igmp vlan
< vid >
config
Displays IGMP configuration for a specific VLAN on the
switch, including per-port data.
(For IGMP operating status, refer to the section titled “Internet Group Man
agement Protocol (IGMP) Status” in appendix B, “Monitoring and Analyzing
Switch Operation” of the
Management and Configuration Guide
for you
switch.)
2-7
